The two design choices that drive your sizing decision
The Airweight Super High Waist Legging 7/8 is built around two features that affect how it fits: a super high waist and a 7/8 cut. The waist is designed to provide gentle support and a smooth silhouette, while the 7/8 length balances coverage with freedom of movement. Neither feature is adjustable, so your size choice is the main lever you have.
Because the catalog does not list a size chart with waist, hip, or inseam measurements, the most reliable approach is to start from the size you normally wear in similar high-rise performance leggings and use the fit notes below to decide whether to size up or down.
What the catalog confirms about the Airweight Super High Waist Legging 7/8
- Airweight Super High Waist Legging 7/8: Lightweight construction designed to move with you during workouts. A lightweight fabric matters for fit because it tends to follow your body rather than hold its own shape. If you are between sizes, the lighter construction may make the smaller size feel more secure without excessive compression.

Airweight Super High Waist Legging 7/8 - Airweight Super High Waist Legging 7/8: Super high waist provides gentle support and a smooth silhouette. The high rise sits above the hips, so the waistband fit is critical. If you have a shorter torso, a super high waist may sit closer to your ribs; if you have a longer torso, it may sit at your natural waist. This is a fit preference, not a sizing flaw.
- Airweight Super High Waist Legging 7/8: 7/8 cut balances coverage and freedom for a full range of motion. A 7/8 length ends above the ankle, which reduces fabric bunching during lunges and squats. If you prefer full-length leggings for cold rooms or floor work, this cut may feel shorter than you expect.
- Airweight Super High Waist Legging 7/8: Tailored fit available in XS, S, M, and L to suit a variety of body types. The size range is XS through L. If you normally wear XL or larger in other brands, this specific style may not have a confirmed option for you in the supplied catalog.
How to choose your size when you are between sizes
The catalog does not provide a numeric size chart, so use these practical checkpoints based on the design features rather than guessing at measurements.
- If you want the high waist to stay put during strength training: Choose the size that matches your usual high-rise legging size. A super high waist relies on a close fit to provide gentle support; sizing up too far may reduce that support and cause the waistband to slide during overhead presses or rows.
- If you have a shorter torso and high rises tend to dig in: Consider sizing up one size from your usual, because the super high waist will sit higher on a shorter torso. The lightweight construction means the larger size may still feel streamlined rather than loose.
- If you have a longer torso and high rises often feel low: Stay with your usual size. Sizing down is unlikely to raise the waistband meaningfully and may make the 7/8 length feel tighter through the calf.
- If you are shopping for studio classes and everyday wear: The catalog lists studio classes, strength training, and everyday active wear as intended uses. For lower-intensity wear, your usual size is the safer starting point because the gentle support is designed for all-day comfort, not maximum compression.
Where the 7/8 length fits into your training week
A 7/8 cut is a deliberate compromise: it offers more coverage than a capri but less than a full-length legging. For strength training, that shorter length can reduce fabric catching around the ankle during deadlifts or split squats. For studio classes, it keeps the leg line clean without extra fabric pooling at the floor.
The trade-off is warmth and floor coverage. If you train in a cold garage gym or do a lot of mat work where you want fabric over the ankle, the 7/8 length may leave that area exposed. The catalog does not confirm any thermal or compression rating, so treat this as a coverage preference rather than a performance claim.
Airweight Super High Waist Legging 7/8 vs a typical full-length legging
- Waist height: The Airweight Super High Waist Legging 7/8 sits above the hips with a super high rise. A typical full-length legging may sit at or just below the navel, so the waistband position will feel different, especially if you are not used to high-rise fits.
- Leg length: The 7/8 cut ends above the ankle. A full-length legging covers the ankle, which can be warmer but may bunch during dynamic movement. Choose based on whether you prefer less fabric at the ankle or more coverage.
- Sizing approach: Because the catalog lists sizes XS through L without a measurement chart, the same size you wear in other high-rise performance leggings is the most practical starting point. For full-length leggings, you may have relied on inseam length; here, the 7/8 cut is fixed, so focus on waist and hip fit instead.
What the supplied information does not cover
The catalog does not include a numeric size chart, fabric composition, care instructions, or compression rating for the Airweight Super High Waist Legging 7/8. That means you cannot confirm exact waist, hip, or inseam measurements from the supplied information alone. If you need those details, check the product page or contact Tonal directly before ordering.
The catalog also does not confirm whether the leggings have pockets, a gusset, or flatlock seams. None of these are stated as missing features; they are simply not confirmed by the supplied record. Focus your decision on the two confirmed design features—the super high waist and the 7/8 length—and choose your size from the XS–L range using the fit checkpoints above.


